background image

 

Quantum Corp. (NYSE: QTM) is the leading global storage company 
specializing in backup, recovery and archive. Combining focused 
expertise, customer-driven innovation, and platform independence, 
Quantum provides a comprehensive range of disk, tape, media, and 
software solutions supported by a world-class sales and service 
organization. As a long-standing and trusted partner, the company works 
closely with a broad network of resellers, OEMs, and other suppliers to 
meet customer’s evolving data protection needs.

 

For assistance contact Quantum Technical Assistance center:

 

North America

+1-800-284-5101

 

UK, France, and Germany

00800 4 QUANTUM

 

EMEA

+44 1256 848 766

For worldwide support: 

www.quantum.com/contactsupport

81-81713-02 A01, May 2007

LTO-3 Half-Height Tape Drive Quick Start Guide

Backup. Recovery. Archive. It’s What We Do.

©2007 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, and all other 
logos are registered trademarks of Quantum Corporation or their respective owners.

You should also consider the following safety points:
• Install the drive in an enclosure that limits the user’s access to live parts, gives 

adequate system stability, and provides the necessary grounding for the drive.

• Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation 

applied—Extra Low Voltage (SEC) for UL and CSA, and Safety Extra Low Voltage for 

BSI and VDE (if applicable).

Summary of Contents for LTO3 A-Series

















Reviews: