background image

LTO-3 Half-Height Tape Drive

 LTO-3 Half-Height Tape Drive 

Quick Start Guide 

Introduction

Quantum LTO Ultrium tape drives leverage LTO technology and 

Quantum-exclusive features to provide the most reliable and affordable 

tape data protection to medium and large businesses. 
Quantum LTO-3 Half-Height Tape Drives, models TC-L32AX and TC-

L32AN (internal), TC-L32BX and TC-L32BN (tabletop), and TC-L33CX and 

TC-L33CN (rackmount), are the most reliable Ultrium drives on the market, 

delivering reliability features only available from Quantum to extend 

media life, Variable-speed Transfer to automatically match the host's data 

transfer rate, and Dynamic Powerdown to protect the drive and media in 

the event of power loss. Combined with SmartVerify to concurrently verify 

all data written to the tape, these features make Quantum LTO drives a 

sound investment and a complete data protection solution.

Figure 1  Internal Drive

Contents

0

This document is provided in the 

following languages:
• English

• French

• German

• Japanese

• Korean

• Simplified Chinese

• Spanish

• Traditional Chinese

Each language includes the following 

sections:

Introduction

Before Installing the LTO-3 Half-

Height Tape Drive

Installing the Internal LTO-3 Half-

Height Tape Drive

Installing the Tabletop LTO-3 Half-

Height Tape Drive

Installing the LTO Driver Software

Registering the LTO-3 Half-Height 

Tape Drive

Safety Compliances

Electromagnetic Compatibility 

(EMC) Compliances

Summary of Contents for LTO3 A-Series

















Reviews: