6
Installing the Tabletop LTO-4 Half-Height Tape Drive
LTO-4 Half-Height Tape Drive Quick Start Guide
After connecting the internal drive interface and DC power cables, proceed to
Restarting
the Internal Tape Drive System
in the following subsection.
Restarting the Internal
Tape Drive System
0
After connecting the internal drive interface and DC power cables:
1
Restart the workstation or server system.
2
Verify that the internal LTO-4 Half-Height Tape Drive comes on and completes the
Power On Self Test (POST) functions.
3
As required, proceed to either:
•
Installing the LTO Driver Software
on page 7
•
Registering the LTO-4 Half-Height Tape Drive
on page 8
Installing the Tabletop LTO-4 Half-Height Tape Drive
To install the tabletop LTO-4 Half-Height Tape Drive, complete the following procedures
in the order presented:
1
Connecting the Tabletop Drive Interface and AC Power Cables
2
Restarting the Tabletop Tape Drive System
on page 7
3
Installing the LTO Driver Software
on page 7, if required
4
Registering the LTO-4 Half-Height Tape Drive
on page 8
Connecting the Tabletop
Drive Interface and AC
Power Cables
0
As shown in
figure 5
, the rear panel of the tabletop LTO-4 Half-Height Tape Drive has
connectors for:
• A 26-pin SFF-8088 mini-SAS style interface cable
• The AC power cable
Figure 5 Tabletop Drive
Interface and AC Power
Connectors
26-pin SFF-8088 mini-SAS connector
AC power switch
AC power connector
