Prism FC420 Bridge Option User’s Guide
Document 6473031-04, Ver. 4, Rel. 0
September 2003
Prism FC420 Services Software Commands
19
FcFullDuplex
Enables/disables full duplex
communication between the FC420
bridge and other Fibre Channel devices.
enabled
set fcfullduplex [enabled |
disabled]
get fcfullduplex
FcHard
Enables/disables Fibre Channel hard
address assignment. Under soft
addressing the FC420 loop address is
assigned during loop initialization.
disabled
set fchard [enabled | disabled]
get fchard
FcHardAddress
Sets/displays the value used as the FC-
AL hard address.
FC port 0
0x03
set fchardaddress [fp
[address]]
get fchardaddress [fp]
FcInitiator
Enables/disables the initiator function
of the FC420 bridge on the Fibre channel
network.
disabled
set fcinitiator [enabled |
disabled]
get fcinitiator
FcPortList
(Immediate)
Lists the available Fibre Channel ports
and their current status.
fcportlist
Fcp2
Enables/disables the FC420 bridge’s
compliance with the FCP-2 Fibre
Channel specification.
enabled
set fcp2 [enabled | disabled]
get fcp2
Fcp2Conf
Enables/disables the FC420 bridge’s
capability to request FCP_CONF IUs.
This option is valid only when the
fcp2
command is also enabled.
enabled
set fcpconf [enabled | disabled]
get fcp2conf
Fcp2CRN
Enables/disables the FC420 bridge’s
capability to accept CRNs for precise
delivery of SCSI commands. This option
is only valid when the
fcp2
command is
also enabled.
disabled
set fcpcrn [enabled | disabled]
get fcp2crn
FcSCSIBusyStatus
Specify the SCSI status value returned
when the FC420 is unable to accept a
SCSI command due to a temporary lack
of internal resources.
BUSY
set fcscsibusystatus [busy |
qfull]
getfcscsibusystatus
FcTargets
(Immediate)
Provides the node name, Fibre LUN,
and inquiry data for every Fibre
Channel target device visible to an
FC420 bridge operating in initiator
mode.
fctargets <fp>
Command
Description
Default
Syntax
