Installation
9
DXi6700/DXi6701/DXi6702
1
For
Segmentation
, select the appropriate configuration option to isolate traffic as
necessary.
2
For
Bonding
, select
Round Robin (Mode 0)
.
3
Connect the required Ethernet ports to your switch and configure IP information
appropriately on the
Network
page.
For simplicity, use of both 10 GbE ports simultaneously is discouraged.
Configuration recommendations for the use of bonded 10 GbE ports are unique to
the type of 10 Gb switch used. Contact Quantum Customer Support for specific
guidance if you require dual-10 GbE connectivity.
4
Contact your network administrator to create a Round Robin compatible Link
Aggregation Group on the switch corresponding to each group of bonded ports.
Replication Firewall
Port Requirements
The following firewall ports must be opened for replication to operate:
• Port 80
• Port 1062
Installation and
Integration Services
Installation and integration of the DXi6700 systems by Quantum is not required since
the DXi6700 are customer installable. Quantum recommends that system installation be
performed only by qualified network or system administrators who have a working
knowledge of ISV setup and configuration.
If you want to purchase professional installation services, please contact your Quantum
Sales representative to discuss installation services.
Phone support for the installation process is available via the Quantum support number
for your area. Quantum World Wide phone support is as follows:
Americas:
800-284-5101 (toll free)
949-725-2100
Europe, Middle East and Africa:
00800-4-782-6886 (toll free)
+49 6131 3241 1164
Asia Pacific:
+800 7826 8887 (toll free)
+603 7953 3010
