background image

Installation

3

DXi6700/DXi6701/DXi6702

To use DXi Accent, you must install the Quantum OST Client Plug-in on the media server. 

For information about installing the OST Plug-in and using DXi Accent, see the 

Symantec 

NetBackup OST Configuration Guide

.

Installation

Rack Compatibility

Nearly all standard four-post 19” server racks meeting EIA-310 specifications are 

compatible with the DXi6700 rack mount kits. Rack cabinets meeting EIA-310 

specifications have an alternating pattern of three holes per rack unit with center-to-

center hole spacing (beginning at the top hole of a 1-U space) of 15.9 mm, 15.9 mm, 

and 12.7 mm (0.625 inch, 0.625 inch, and 0.5 inch) for the front and back vertical rails. 

For detailed information, refer to the 

DXi6700 Installation and Configuration Guide

 (6-

67201) or the 

DXi6700 Installation and Configuration Guide

 (6-67196).

Note:

The rack mounting rails extend to support rack depths from 26.5 to 36.4 inches 

(67.3 to 92.4 cm).

When planning your rack installation, be sure to consider leaving room in the rack for 

future system expansion. You can expand the storage capacity of the DXi6700 by adding 

up to nine expansion modules. Also be sure to leave adequate room behind the rack to 

open the rear rack door.
See 

Physical Characteristics

 on page 16 for node and expansion module rack space 

requirements.

DXi6700 Setup and 

Configuration

After hardware has been installed and initially configured, you are ready to use your 

DXi6700. The remote management console allows you to reconfigure your DXi6700 at 

any time.

Required Network Information

To utilize the remote management console of the DXi6700, you must connect it to your 

network.
Note the following considerations:

• DHCP (Dynamic Host Configuration Protocol) is not supported.You must provide a 

static IP address at the time of installation.

• The default IP Address is: 

10.1.1.1

You and other administrative users can always return to the remote management 
console to modify all DXi6700 settings, including network settings. Refer to the 

DXi6700 

User’s Guide

 included on the Quick Reference and Documentation CD for additional 

information on initially configuring your DXi6700.

Summary of Contents for DXi6700 series























Reviews: