Quantum DXi4701 User Manual Download

Page: 193 / 440

Chapter 7: DXi4701 Status

Hardware

Quantum DXi4701 User’s Guide

167

Figure 90 Hardware Summary
Page

The

Hardware Summary

page displays the following information:

•

Available System Memory (RAM)

- The total amount of memory

(RAM) installed in the system.

•

Free System Memory (RAM)

- The amount of system memory

(RAM) that is currently free.

•

State

- The status of the node.

•

Status

- The overall status of all components in the node.

•

Component Name

- The name of the main component.

Click the component name to see detailed information (see

Details

on page 167).

•

Component Status

- The overall status of the main component.

Details

The

Details

page allows you to view detailed information about the

hardware components of the DXi4701.
To access the

Details

page, on the

Hardware

page, click the

Details

tab.

Use the

Details

page to view information for the following components:

•

System Board

•

Host Bus Adapters

•

Network Ports

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands