Quantum DXi4701 User Manual Download Page 194

Page: 194 / 440

Chapter 7: DXi4701 Status
Hardware

168

Quantum DXi4701 User’s Guide

•

Storage Arrays

System Board

The

System Board

page allows you to view information reported by the

main system board in the node, such as temperature, voltage, fan, and

power supply information.
To access the

System Board

page, on the

Details

page, click the

System

Board

tab (see

Figure 91

Figure 91 System Board Page

The

System Board

page displays the following information:

•

Component

- The name of the component on the system board.

•

Type

- The component type (Sensor, Fan, or Power Supply).

•

Value

- The value reported by the sensor or component.

•

Status

- The status of the component.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands