Quantum DXi4701 User Manual Download Page 195

Page: 195 / 440

Chapter 7: DXi4701 Status

Hardware

Quantum DXi4701 User’s Guide

169

Host Bus Adapters

The

Host Bus Adapters

page allows you to view information about

installed Fibre Channel cards and their ports.

Note:

The

Host Bus Adapters

page displays only on DXi4701

configurations that include a Fibre Channel card.

To access the

Host Bus Adapters

page, on the

Details

page, click the

Host Bus Adapters

tab (see

Figure 92

Figure 92 Host Bus Adapters
Page

The

Host Bus Adapters

section displays the following information

about each Fibre Channel card:

•

Component

- The name of the Fibre Channel card.

Click the name of the card to view detailed information for the card

below.

•

Status

- The status of the Fibre Channel card.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

The

Fibre Channel Controller

section displays the following

information about the ports in the selected Fibre Channel controller:

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands