Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide
58
Figure 37 Fibre Channel
Configuration
2
While the Port WWNs are always unique, the Node WWNs can be set
according to the
Make the Node WWN
section as follows:
a
Selecting
Globally Unique but same for all ports
makes the Node
WWNs the same for all Fibre Channel ports.
b
Selecting
Equal to the Port WWNs for each port
makes the Node
WWNs equal to the Port WWNs.
3
Selecting The
Port Settings
page (see
table 8
for field descriptions)
allows you to set the AL_PA, Loop ID and link speed for each Fibre
Channel port connecting the DX3000/DX5000 system to the customer
SAN.
Note:
The DX3000/DX5000 system must be off-line to configure
the Fibre Channel options.
