Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide
47
Figure 30 Date and Time
Configuration
2
There are two options for setting the system date and time:
a
Select
Manual
to manually set the system date and time using the
Change
button for the system date and drop down boxes for the
system time.
b
Select
Use NTP
(Network Time Protocol) to synchronize the
DX3000/DX5000 system to an NTP server. The “Select a Server”
selection makes a list of well-known NTP servers such as the U.S.
Naval Observatory Master Clocks in Washington, DC and
Colorado Springs, Colorado available. The “Specify server”
selection enables you to type the name or IP address of any
desired NTP server. NTP sends periodic time requests to the
DX3000/DX5000 system, obtaining time stamps and using them
to adjust the system’s clock.
Configuring the Security
Options
3
To access the
Security
page:
1
In the
Configuration
page, click
Security
.
The management frame displays the
Security
page (see
figure 31
).