![background image](http://html2.mh-extra.com/html/quantum/dlttape-sdlt-220/dlttape-sdlt-220_user-reference-manual_3544378017.webp)
C5 | Connections: Daisy Chain
C5
Connections: Daisy
Chain
If you are adding your Super DLTtape drive to a SCSI daisy
chain, follow these steps:
1.
Ensure that all devices have unique SCSI IDs.
C3
2.
Make sure the host computer and all peripheral devices
are powered off.
!
Never connect the tape drive while the host system or
peripheral devices are powered on.
3.
Connect the SCSI cable from the host computer to the
lower SCSI connector on the back of the tape drive.
4.
Continue the SCSI chain using the upper SCSI
connector.
5.
If the SDLT Super DLTtape drive is the last device in
the chain, connect a terminator to the upper SCSI
connector.
!
You must terminate the SCSI bus. The SCSI controller
terminates one end, while a terminator on the last device
in the chain terminates the other end.
For more information about connecting the tape drive, refer
to the
SDLT 220 and SDLT 320 Product Manual
.
3
3
Terminate upper
SCSI port.