Chapter 8 Rear-Panel CAT 6 Cable Connector Plate
Installing a CAT 6 Cable Connector Plate
2U Rackmount Component Replacement Guide
59
3
Connect the Ethernet cable on the inside of the 2U Rackmount (which
is connected to the tape drive) to the GigE connector on the CAT 6
cable connector plate (see
figure 46
).
Figure 46 Connecting the
Ethernet cable to the CAT 6
Cable Connector Plate Inside
the 2U Rackmount
4
Connect one end of an Ethernet cable to the CAT 6 cable connector
plate on the outside of the 2U Rackmount (see
figure 47
). Connect the
other end of the Ethernet cable to the host computer or router.
GigE connector