![background image](http://html1.mh-extra.com/html/quantum/dlt-2500/dlt-2500_product-manual_3624549040.webp)
Configuring and Operating the DLT2000 Basic Tape Drive
3-2 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem
3.2.1 Disabling Parity Checking
If your system does not generate parity, you can disable parity checking by adding a
jumper to the SCSI connector on the left side of the DLT2000 drive (Figure 3-1).
To disable parity:
1. Use Figure 3-1, Number
, to locate the SCSI ID connector on the drive.
Left Side
ZKO−1217−17−RGS
Right Side
1
3
2
Front
Bezel
Front
Bezel
1. TRM PWR/TRM ENB Connector
2. SCSI ID Connector
3. Loader Connector
Figure 3-1 DLT2000 Drive Connectors
Summary of Contents for DLT 2500
