![background image](http://html1.mh-extra.com/html/quantum/dlt-2500/dlt-2500_product-manual_3624549114.webp)
Configuring and Operating the DLT2700 Mini-Library
5-20 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem
5.9 Magazine
The front of the magazine has numbers, 0 through 6, that indicate the number of the
slot.
__________________________Note _____________________________
Insert and remove all cartridges at the
front
of the magazine.
____________________________________________________________
5.9.1 Inserting a Cartridge into the Front of the Magazine
To simplify cartridge insertion: place the magazine on a flat surface with the slots
facing you (Figure 5-4). Each slot is numbered to ensure you are inserting the cartridge
correctly in the front of the magazine. Usually, cartridges are inserted into consecutive
slots.
To insert a cartridge into the magazine:
1. Grasp the cartridge with the write-protect switch on the right side facing you
(Figure 5-3).
2. Set the cartridge's write-protect switch to the desired position.
If you want to
…
…
…
…
Then
…
…
…
…
Write to the tape
Slide the switch to the right (orange indicator is
not visible)
Write-protect the
tape
Slide the switch to the left (orange indicator is
visible)
3. Insert the cartridge (Figure 5-4) by pushing it into the slot until you hear a click. A
small metal tab holds the cartridge in place.
Summary of Contents for DLT 2500
