![background image](http://html1.mh-extra.com/html/quantum/atl-7100/atl-7100_operators-manual_3564466057.webp)
Chapter 2 Operating the Library
Using the Control Panel Menus
Quantum|ATL 7100 Series Library Operator’s Guide
41
9
When the following is displayed in the SDA, exit the menu
mode.
Table 4 Tape Drive
Locations
Displaying the
Library’s Actuator
Status
2
This option reports the position of each of the four actuators
(horizontal, vertical, extension, gripper) in the library. You can use
this option to test for proper operation and tracking of each
actuator.
1
Enter the menu mode.
2
Use the
↓
button to bypass the Configuration, Drive Control,
Calibration, System Test, and Robot Control menus and verify
the following is displayed in the SDA:
Menu:Clean
Drive n
Tape Drive Number
Physical Location
Drive 0
top drive
Drive 1
second drive
Drive 2
third drive
Drive 3
fourth drive
Drive 4
fifth drive
Drive 5
sixth drive
Drive 6
bottom drive
Menu:
Diagnostics
Summary of Contents for ATL 7100
