![background image](http://html1.mh-extra.com/html/quantum/7000dlt-series/7000dlt-series_product-manual_770461200.webp)
SCSI Commands
5-96
Quantum DLT 7000 Tape System
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
Table 5–47 EEPROM Vendor Unique Page Parameters (continued)
Name
Value
Rep.
Default
Length
(Bytes)
Usage
PROTECTDIRONWP
ASCII
Binary
0
1
To protect tape directory if the cartridge
write-protect switch is in its write protect
position.
REDUNDANCYMODE
ASCII
Decimal
0
1
Sets the value of the allowed maximum
marginal channel (0 or 1 allowed).
REPBUSYINPROG
ASCII
Binary
0
1
When set, report busy status if the drive is
in the process of becoming ready.
REPORTRCVDPERRS
ASCII
Binary
1
1
To report recovered error if parity error
has been retried successfully, if set.
REPORTRCVRDERR
ASCII
Binary
0
1
This parameter sets the default value of
PER bit of READ / WRITE Error Recovery
Mode page (01h).
REPUAONSEQUNLD
ASCII
Binary
0
1
When set, the drive reports a Not Ready to
Ready Unit Attention when an autoloader
loads the next cartridge
REWINDONRESET
ASCII
Binary
1
1
0 = Do not rewind on BUS RESET or BDR
message (CAUTION: May have partial
block data written to tape if reset occurs
during WRITE).
1 = Rewind the tape medium to BOT on
reset.
SCSIBUSDMATIMER
ASCII
Decimal
2
1
The number of seconds until the drive
times out waiting for ACK once DMA
transfer started. When set to 0, the timer
is set to infinite.
SCSIINQVS
ASCII
Binary
0
1
To return vendor unique inquiry string, if
set.
SCSIRDYEARLY
ASCII
Binary
0
1
The drive reports READY status earlier (if
set).
Summary of Contents for 7000DLT Series
