Quantum 4000 Enhanced, Installation And Operation Manual

Page: 30 / 88

3-4 Safety
62-0162-01
All safety and operating instructions should be read before
this product is operated, and should be retained for future
reference. This unit has been engineered and manufactured
to assure your personal safety. Improper use can result in
potential electrical shock or fire hazards. In order not to
defeat the safeguards, observe the following basic rules for
its installation, use and servicing.
• Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
• Follow Instructions - All operating and use instructions
should be followed.
• Power Sources - The product should be connected to a
power source only of the type directed in the operating
instructions or as marked on the product.
• Power Cord Protection - The AC line cord should be
routed so that it is not likely to be walked on or pinched
by items placed upon or against it, paying particular
attention to the cord at the wall receptacle, and the point
where the cord exits from the product.
• Power Switch - The power switch used in this product
does not disconnect both supply conductors when placed
in the
OFF
position. To completely disconnect power from
this product, unplug the AC power cord from the
receptacle on the back of the unit.
• Object and Liquid Entry - Care should be taken to insure
that objects do not fall and liquids are not spilled into the
product’s enclosure through openings.
• Servicing - The user should not attempt to service the
product beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Precautions
Do not use oil, solvents, gasoline, paint thinner or insecticides
on the unit.
Do not expose the unit to moisture, to temperatures higher
than 140ºF (60ºC) or to extreme low temperatures.
Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment which generates electrical noise.
Hold the AC power plug by the head when removing it from
the AC source outlet; pulling the cord can damage the internal
wires.