Manual for Advance 6E series
Chapter 2
Installation Instructions
Chapter 2
Installation Instructions
This section covers External Connectors and Jumper Settings. Refer to the motherboard
layout chart for the locations of all jumpers, external connectors, slots and I/O ports.
Furthermore, this section lists all necessary connector pin assignments for your reference.
The particular states of the jumpers, connectors and ports are illustrated in the following
figures. Before setting the jumpers or inserting these connectors, please pay attention to
the directions.
Be sure to unplug the AC power supply before adding or removing expansion
cards or other system peripherals, otherwise your motherboard and expan-
sion cards might be seriously damaged.
External Connectors
PS/2 Keyboard Connector, PS/2 Mouse Connector
PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size
keyboard, an adapter should be used to fit this connector. PS/2 mouse connector is for the
usage of PS/2 mouse.
USB1, USB2 and LAN Connectors( LAN Connector is optional )
Two USB ports are for connecting USB devices. The RJ-45 connector is for onboard LAN.
Parallel Port, Serial Port Connector( UART1 ), Monitor Output Connec-
tor( VGA )
The parallel port connector can be connected to a parallel device such as a printer. The serial
port UART1 connector can be connected to a serial port device such as a serial port mouse.
The VGA connector is for output to a VGA-compatible device. You can enable/disable
them and choose the IRQ or I/O address in “INTEGRATED PERIPHERALS” in AWARD BIOS
SETUP.
Chapter 2
PS/2 Mouse Connector
PS/2 Keyboard Connector
USB1
USB2
LAN(optional)
LINK
ACTIVE
Parallel Port
UART1
VGA
