Quantum Design Advance 6E Manual Download

Page: 5 / 64

Manual for Advance 6E series

Chapter 1

Introduction

Chapter 1

Chapter 1

Introduction

Overview

The Advance 6E series are high performance, cost-effective and energy efficient mainboards

from 66MHz, 100MHz and 133MHz based on Socket-370 processors. The green mainboard

utilizes the VIA Apollo PLE133 chipset consisting of the VIA VT8601A( North Bridge ) and

the VIA VT82C686B( South Bridge ). The chipset integrates AGP 2D/3D graphics accelera-

tor to provide high graphics performance. It supports the UltraDMA-33/66/100 IDE, PC100/

PC133 SDRAM and AC’97 audio. In addition, advanced features are supported such as

wake-up on LAN, wake-up on internal/external modem, ACPI power management and hard-

ware monitoring.

Key Features

Form Factor

microATX form factor of 244mm x210mm

Microprocessor

Supports 66/100/133MHz FSB speed

Supports all Intel

Pentium III(Coppermine) FC-PGA processors at 533/600EB/667/733/

800EB/866/933MHz/1GHz and future processors with 133MHz FSB speed

Supports all Intel

Pentium III(Coppermine) FC-PGA processors at 500/550/600/650/

700/750/800/850MHz and future processors with 100MHz FSB speed

Supports all Intel

Celeron™ FC-PGA processors at 533/566/600/633/667/700/733/

766MHz and future processors with 66MHz FSB speed

Supports all Intel

Celeron™ FC-PGA processors at 800MHz and future processors

with 100MHz FSB speed

Supports all Intel

Celeron™ PPGA processors at 300/300A/333/366/400/433/466/

500/533MHz with 66MHz FSB speed

Supports later processors Cyrix-III at 500/533/550/600/667MHz and future processors

Chipset

VIA Apollo PLE133 chipset: VT8601A, VT82C686B

Memory

Provides two 168-pin 3.3V unbuffered 100/133MHz DIMM sockets

Supports PC100/PC133 SDRAM

Summary of Contents for Advance 6E

































































Search results

Summary of Contents for Advance 6E

Reviews:

Related manuals for Advance 6E

Brands by name

Popular brands

Quantum Design Advance 6E, Manual

Search results

Summary of Contents for Advance 6E

Reviews:

Related manuals for Advance 6E

Brands by name

Popular brands