Quantum Design Advance 6E Manual Download

Page: 6 / 64

Manual for Advance 6E series

Introduction

Onboard IDE

Supports two PCI PIO and Bus Master IDE ports

Two fast IDE interfaces supporting up to four IDE devices including IDE hard disks

and CDROM drives

Supports up to mode 4 timing

Supports Ultra DMA33/66/100

Onboard I/O

One floppy port supporting up to two 3.5” or 5.25” floppy drives with 360K/720K/

1.2M/1.44M/2.88M format

Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4

selective) with 16-byte transmit/receiver FIFOs

One enabled parallel port at the I/O address 378H/278H/3BCH with additional

bidirection I/O capability and multi-mode as SPP/EPP/ECP (IEEE 1284 compliant)

Supports PS/2 mouse and PS/2 keyboard

Provides four USB ports

Provides one IrDA connector

Supports LS-120 floppy disk drive and Zip drive

All I/O ports can be enabled/disabled in the BIOS setup

Onboard Audio

Standard AC97 Codec interface

Onboard AGP

Supports AGP 4x

Integrated 2D/3D Graphics Controller

Supports 2~8Mbytes of Frame Buffer

Onboard LAN( optional )

Provides One 10/100M LAN interface

10/100 Mbit/sec Ethernet support

Advanced Features

PCI- 2.2 compliant

Provides Trend ChipAwayVirus® On Guard

Supports wake-up on LAN

Supports wake-up on internal/external modem

Supports system monitoring (monitors system temperature, CPU temperature, voltages

and fan speed)

Summary of Contents for Advance 6E

































































Search results

Summary of Contents for Advance 6E

Reviews:

Related manuals for Advance 6E

Brands by name

Popular brands

Quantum Design Advance 6E, Manual

Search results

Summary of Contents for Advance 6E

Reviews:

Related manuals for Advance 6E

Brands by name

Popular brands