4
Model 700A, 701A Quick Start Guide
Computer Interfaces
RS-232 9-Pin D-Sub Plug
Pin Signal
1 No connection
2 Data in (Rx)
3 Data out (Tx)
4 DTR out
5 Ground
6 No connection
7 RTS out
8 CTS in
External DC Power /
Battery Recharge Input
Warning:
Using an external power source other than the
Quantum Data supplied AC power supply may injure the
operator and damage the generator.
Center pin:
+12.0 VDC
Outer sleeve:
- (Ground)
Factory defaults
9600 baud
8 data bits
No parity
1 stop bit
X on - X off
Pinout same as for 9 pin PC-AT serial port connector
DVI interface on 700A
outputs analog signals
only, using included
DVI-to-VGA adaptor.
(Active on 701A only)
SDI/HD-SDI
