8-19
o
Line3 – IPstMax: <maximum test current>
Setting Channel Post-Test Parameters
PstTest:
Enables or disables post resistance test and
requirements for the channel.
PstMeas:
Displays the measured resistance from the last run
post-test.
TstType:
Sets the type of test for determining pass/fail
condition of the Post Test. The types are as follows:
Standard – Indicates “Ground Fault” if PstMeas is less
than PstMin and “Resistance Range Error” if above
PstMax if PstMax is enabled.
Outside – Indicates “Resistance Range Error” if
PstMeas is between PstMin and PstMax.
Outside Pre – Indicates “Resistance Range Error” if
PstMeas is between PreMin and PreMax.
PstMax:
Sets the maximum resistance allowable to consider a
post-test as passed. (May be disabled by setting to 0
through the command interface)
PstMin:
Sets the minimum resistance allowable to consider a
post-test as passed.
IPstMax:
Sets the maximum test current for measuring the
resistance.