8-17
•
Page0
Channel Menu (A, B, C, or D)
o
Line0 – Channel: Enabled, Disabled
o
Line1 – Wid: <width>
o
Line2 – Dly: <delay>
o
Line3 – decimal place indicator
•
Page1
o
Line0 – ‘Enable’ Enabled, Disabled
o
Line1 – empty
o
Line2 – Brst: <burst>
o
Line3 – Ampl: <amplitude>
Setting Channel Output Parameters
‘Enable’
Enables or disables the channel for pulsing.
Wid:
Sets the channel pulsewidth.
Dly:
Sets the channel delay until active edge.
Brst:
Sets the burst count for the channel. When system is
in ‘Single Shot’ mode, this parameter will display
‘(Disabled)’ and not be adjustable.
Ampl:
Sets the amplitude of the output current pulse.
Offs:
Sets the amplitude offset of the output current pulse.
