QUANTA STRATOS S210 Series S210-X2A2J, Technical Manual

Page: 216 / 262

BMC C
ONFIGURATION
G
ROUP
4-
50
Virtual Media
In MegaRAC GUI, this page to configure Virtual Media device
settings. If you change the configuration of the virtual media in
this page, it shows the appropriate device in the JViewer Vme-
dia dialog. For example, if you select two floppy devices in Con-
figure Virtual Media page, then in JViewer > Vmedia, you can
view two floppy device panel.
To open Virtual Media page, click
Configuration > Virtual
Media
from the main menu. A sample screenshot of User Man-
agement Page is shown in the screenshot below.
Configure Virtual Media Devices
The following fields are displayed in this page.
Procedure:
1. Select the number of Floppy devices, CD/DVD devices
and Hard disk devices from the dropdown list.
2. Enable the
Local Media Support
if needed.
3. Click
Save
to save the changes made else click Reset to
reset the previously saved values.
Note:
There is a list of reserved users which cannot be added / modi-
fied as BMC users. Please Refer “MEGARAC SP-X Platform
Porting Guide” section “Changing the Configurations in PMC
File-> User Configurations in PMC File” for the list of reserved
users.
Configure Virtual Media Devices
I
TEM
D
ESCRIPTION
Floppy devices
The number of floppy devices that support for
Virtual Media redirection.
CD/DVD devices
The number of CD/DVD devices that support for
Virtual Media redirection.
Hard disk devices
The number of hard disk devices that support for
Virtual Media redirection.
Local Media Support
To enable or disable the local media support for
Virtual Media redirection.
Save To save the configured settings.
Reset To reset the previously-saved values.
Note:
Maximum of two devices can be added in Floppy, CD/DVD and
Hard disk drives.