BMC
C
ONFIGURATION
G
ROUP
3-40
Table 14: Network Settings Page
I
TEM
D
ESCRIPTION
LAN Interface
Lists the LAN interfaces.
LAN Settings
To enable or disable the LAN Settings.
MAC Address
This field displays the MAC Address of the device. This is a read only
field.
IPv4 Settings
This option lists the IPv4 configuration settings.
Obtain IP Address automatically: This option is to dynamically con-
figure IPv4 address using DHCP (Dynamic Host Configuration Proto-
col).
IPv4 Address, Subnet Mask, and Default Gateway: These fields are for
specifying the static IPv4 address, Subnet Mask and Default Gateway
to be configured to the device.
Note:
IP Address made of 4 numbers separated by dots as in
"xxx.xxx.xxx.xxx".
Each Number ranges from 0 to 255.
IPv6 Configuration
This option lists the following IPv6 configuration settings.
IPv6 Settings: This option is to enable the IPv6 settings in the device.
Obtain an IPv6 address automatically: This option is to dynamically
configure IPv6 address using DHCP (Dynamic Host Configuration
Protocol).
IPv6 Address: To specify a static IPv6 address to be configured to the
device. Eg: 2004:2010
Subnet prefix length: To specify the subnet prefix length for the IPv6
settings.
Note:
Value ranges from 0 to 128.
Default Gateway: Specify v6 default gateway for the IPv6 set-
tings.
Reserved IPv6 Address: Some IPv6 addresses are reserved by
IETF. List is showed as below, so when users set these Blocking
IPv6 addresses, WebUI will pop-up warning message.
VLAN Configuration
It lists the VLAN configuration settings.
VLAN Settings: To enable/disable the VLAN support for selected
interface.
VLAN ID: The Identification for VLAN configuration.
Value ranges from 2 to 4094.
VLAN Priority: The priority for VLAN configuration.
Value ranges from 0 to 7.
7 is the highest priority for VLAN.
Save
To save the entries.
Reset
To Reset the modified changes.
