BMC
C
ONFIGURATION
G
ROUP
3-46
Procedure:
1. In the Alert Policy Tab, select the slot for which you have to configure the Alert pol-
icy. That is, In the
Event Filter Entry Page
, if you have chosen Alert Policy number
as 4, you have to configure the 4th slot (the slot with Policy Number 4) in the Alert
Policy Tab.
2. Double click the slot and click
Add
to open the
Add Alert Policy Entry Page
as
shown in the screenshot below.
Figure 3-28.
Add Alert Policy Entry Page
Table 17: PEF Management - Alert Policy
I
TEM
D
ESCRIPTION
Policy Entry #
Displays Policy entry number for the newly configured entry (read-
only).
Policy Number
Displays the Policy number of the configuration.
Policy Configuration
To enable or disable the policy settings.
Policy Set
To choose any one of the Policy set values from the list.
0: Always send alert to this destination.
1: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set.
2: If alert to previous destination was successful, do not send alert to
this destination. Do not process any more entries in this policy set.
3: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different channel.
4: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different destination type.
Channel Number
To choose a particular channel from the available channel list.
Destination Selector
To choose a particular destination from the configured destination list.
Note:
LAN Destination has to be configured - under
Configuration
->
PEF
->
LAN Destination
.
Modify
To modify the existing entries.
Delete
To delete Alert Policy list.
