QUANTA QuantaGrid S31A-1U User Manual Download

Page: 151 / 159

BMC

IRMWARE

PDATE

3-93

AMI

This wizard takes you through the process of AMI based firmware upgrade.

To process

AMI

Firmware Upgrade, select

AMI

option and click

Continue

to upgrade the

current device firmware. The screenshot of AMI Firware Update is as shown below.

Note:

All configuration items below will be preserved as default during the restore
configuration operation.

The various are listed below.

Preserve All Configurations

: To preserve all the listed configurations.

Preserve Configuration Item

: The Preserve Configuration items will be listed.

Preserve Status

: The status of the Preserve Configuration items.

Enter Preserve Configuration

: To redirect to the Preserve Configuration page.

Enter Update Mode

: To upgrade the current device firmware.

WARNING:

Please note that after entering the update mode, the widgets, other web
pages and servic-es will not work. All the open widgets will be automatically
closed. If the upgradation is cancelled in the middle of the wizard, the device
will be reset.

Summary of Contents for QuantaGrid S31A-1U
































































































































































Search results

Summary of Contents for QuantaGrid S31A-1U

Reviews:

Related manuals for QuantaGrid S31A-1U

Brands by name

Popular brands

QUANTA QuantaGrid S31A-1U, User Manual

Search results

Summary of Contents for QuantaGrid S31A-1U

Reviews:

Related manuals for QuantaGrid S31A-1U

Brands by name

Popular brands