QUANTA DQ61, User Manual, Page: 17 / 22

Pag. 17
Via A. Ferrarin, 19-23 • 50145 Firenze (Italy) • Tel
.: +39 055 3024555 • Fax: +39 055 317844
P. I.V.A. e Cod. Fisc.: IT 04273220485 REA CCIAA Firenze: n. 0433306 • Registro Imprese n. FI017 -58513
Banche: INTESA-SAN PAOLO - ABI: 06160, CAB: 02848 UNICREDIT – ABI 02008, CAB: 38106
http:
www.quanta.it
e-mail:
acquisti@quanta.it
http:
www.quantasrl.eu contabilita@quanta.it
ufficiotecnico@quanta.it
P.E.C.: quanta@pec.quanta.it
Default 19.200. (Allowed values: between 1.200 and 38.400 baud).
If the RS485 MODBUS option is not installed, the value indicated is and will not be editable.

Choice of unit between °C and °F.
.
Default °C.

Buzzer Enable on Alarm
.
Default YES.
Warning: when the buzzer is disabled it does not sound on activation relay ALARM, TRIP relay and
relay FAULT.

Default Setting
.
Default NO.
This selection resets the device to factory settings.
6.2.7 INSTRUMENT INFO
This menu shows the software revision and hours of work . Pressing twice the key

you can reset the partial
working hours counter. The total counter can not be reset.
6.2.8 OUTPUT TEST
This menu allows you to check the operation of the output relays and LEDs associated with. You select the
relay to test using keys

and

, and then pressing the key

switching from off to on and vice versa . Pressing
the MENU button the test ends, the relays and the LEDs resume their work status
By entering this menu, any alarms are turned off to allow the test and are reactivated at the return of the normal
operating condition.

