UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 771/1523
7.9.1.3
show ip vrrp interface
This command displays all configuration information of a virtual router configured on a specific interface.
Note that the information will be displayed only when the IP address of the specific interface is
configured.
Syntax
show ip vrrp interface {<slot/port> | vlan <vlan-id>} [<vrid>]
<slot/port> -
Valid slot and port number separated by forward slashes.
<vrid> -
Virtual router ID.
<vlan-id>
-
VLAN ID. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VRID:
Represents the router ID of the virtual router.
Primary IP Address:
This field represents the configured IP Address for the Virtual router.
VMAC address:
Represents the VMAC address of the specified router.
Authentication type:
Represents the authentication type for the specific virtual router.
Priority:
Represents the priority value for the specific virtual router.
Configured Priority:
The priority configured through the ip vrrp vrid priority 1-254 command.
Advertisement interval:
Represents the advertisement interval for the specific virtual router.
Pre-Empt Mode:
Is the preemption mode configured on the specified virtual router.
Administrative Mode:
Represents the status (Enable or Disable) of the specific router.
Accept Mode:
When enabled, the VRRP Master can accept ping packets sent to one of the virtual
router’s IP addresses.
State:
Represents the state (Master/backup) of the specific virtual router