Quanmax MITX-V1K0 Series, User Manual

Page: 77 / 96

MITX-V1K0 Series - User Guide, Rev. 1.0
www.quanmax.com // 77
Figure 53: BIOS Advanced Menu - Trusted Computing
BIOS SETUP UTILITY
Main Advanced Power Boot Security Save & Exit
TPM20 Device Found
Firmware Version: 5.62
Vendor: IFX
Security Device Support [Enable]
Active PCR banks* SHA-1, SHA256
Available PCR banks* SHA-1, SHA256
SHA1 PCR Bank* [Enabled]
SHA256 PCR Bank* [Enabled]
→ ←
: Select Screen
↑ ↓
: Select Item
Pending operation* [None] Enter: Select
Platform Hierarchy* [Enabled] +/-: Change Opt.
Storage Hierarchy* [Enabled] F1: General Help
Endorsement Hierarchy* [Enabled] F2: Previous Values
TPM2.0 UEFI Spec Version* [TCG_2] F3: Optimized Defaults
Physical Presence Spec Version* [1.3] F4: Save & Exit
TPM 20 Interface Type* [TIS] ESC: Exit
Version 2.20.1271. Copyright (C) 2019, American Megatrends, Inc.
* These items appear only when enabling Security Device Support.
Feature Option Description
Security Device
Support [Disable], [Enable] Select whether to enable or disable BIOS support for security
device. O.S. will not show Security Device. TCG EFI protocol and
INT1A interface will not be available.
SHA-1 PCR Bank [Disabled], [Enabled] Select whether to enable or disable SHA-1 PCR Bank.
SHA256 PCR Bank [Disabled], [Enabled] Select whether to enable or disable SHA256 PCR Bank.
Pending operation [None], [TPM Clear] Schedule an Operation for the Security Device.
NOTE: Your Computer will reboot during restart in order to
change State of Security Device.
Platform Hierarchy [Disabled], [Enabled] Select whether to enable or disable Platform Hierarchy.
Storage Hierarchy [Disabled], [Enabled] Select whether to enable or disable Storage Hierarchy.
Endorsement
Hierarchy [Disabled], [Enabled] Select whether to enable or disable Endorsement Hierarchy.
TPM2.0 UEFI Spec
Version [TCG_1_2], [TCG_2] Select the TCG2 Spec Version Support.
[TCG_1_2]: the Compatible mode for Win8 / Win10.
[TCG_2]: Support new TCG2 protocol and event format for Win10
or later.
Physical Presence
Spec Version [1.2], [1.3] Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Note
some HCK tests might not support 1.3.