Qualcast Q1W-SP15-1900 Original Instruction Manual Download

Page: 22 / 23

Customer Helpline

01904 727500

www.gardenservicecentre.co.uk

CABLES

IMPORTANT

• Use only 1.00mm

size cable up to 10 metres length maximum.

• YOUR HIGH PRESSURE WAHSER IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO

THE PRODUCT.

1. Mains Cables and Extension Cables are available from your local Approved Service Centre.

2. Do not wire an extension cable directly to your product yourself. Please contact your local

Approved

Service Centre for further information on the connectors and kits available.

3. Only use extension cables specifically designed for outdoor use.

CONNECTORS

IMPORTANT

• Connectors are suitable for use with 2 core cable only. Under no circumstances should these

connectors be used for earthed products.

• All connectors and cables are of splash proof construction. They are not waterproof and must

not be left outside permanently nor should they be submerged or immersed in water. Do not let

cable lay or trail through pools of water or splashed with water from hose pipes.

MAINS PLUG REPLACEMENT

IMPORTANT

• If the plug supplied is cut off it should be destroyed.

There is an electric shock hazard if a cut off plug is inserted into a 13 amp socket.

Our dedicated UK based customer helpline is open 7 days a week to assist you with assembly,

parts queries and technical support. We are open during office hours but you can always send an

email via

[email protected]

. Our experts are here to get you back enjoying

your garden in no time.

For useful assembly, starting and maintenance videos and ordering spares please visit

www.gardenservicecentre.co.uk.

Calling our service does not affect your statutory rights.

UK/Ireland 01904 727500

Monday to Friday 9am – 5pm Saturday & Sunday 11am – 4pm

www.gardenservicecentre.co.uk

email: [email protected]

Plug Replacement

Getting Help

Plug Replacement (continued)

Customer Helpline 01904 727500

Summary of Contents for Q1W-SP15-1900
























Search results

Summary of Contents for Q1W-SP15-1900

Reviews:

Related manuals for Q1W-SP15-1900

Brands by name

Popular brands

Qualcast Q1W-SP15-1900, Original Instruction Manual

Search results

Summary of Contents for Q1W-SP15-1900

Reviews:

Related manuals for Q1W-SP15-1900

Brands by name

Popular brands