Customer Helpline
01904 727500
www.gardenservicecentre.co.uk
WARNING!
In case of contact with detergents: rinse with an abundance of clean water
Always turn off the machine when changing the detergent bottle.
1. Unscrew the bottle cap of the detergent bottle. Fill the detergent tank with the relevant
suppliers diluted recommended mixture level.
2. Pull the spray lance head out to get low pressure, the machine won’t work with the lance in
high pressure position.
3. Turn on the pressure washer. Pull trigger to operate unit. The liquid detergent will
automatically mix with water, and be discharged through the nozzle. Apply detergent to a DRY
work surface, from bottom to top.
3. Rinse with clean water under high pressure (see top visual). On a vertical surface, rinse from
the bottom up, and then rinse from the top down to avoid streaking. Hold nozzle 6-8”
(15-20 cm) from the work surface at a 45
0
angle.
NOTE:
-The lance has to be set to low pressure for the machine to engage when using detergent.
-
Allow detergent to remain on the surface for a short time before rinsing. Do not allow deter-
gent to dry on surface
- Before you change the type of detergent for another job, fill detergent tank with clean water.
Pull the trigger on the lance at low pressure for one minute until all all detergent is flushed
through the system.
Step 5 - Use the fix brush
WARNING!
Always turn off the machine when changing the fixed brush.
1. Fit the fixed brush to the trigger gun.
2.Turn on the pressure washer. Pull trigger to operate unit.
Operate the Pressure Washer
Step 4 – Use the detergent bottle
