for
indicator lamp to light up. In the meantime, prepare your sandwich.
•
When the Green indicator lamp lights up, the heating plates are now sufficiently heated and you can start to
heat and grill your sandwiches.
•
Open the appliances by unlocking the safety catch.
•
Put toast sandwich on heating plate.
•
Close the appliance, making sure that safety catch is locked.
•
While sandwich maker is in use, the green light indicator cycles "ON" and "OFF".
•
After toasting (between 2-4 minutes), unplug the appliance from the power source and remove sandwich
from the cooking plates using a flet wooden or plastic spatula. Never use sharp or metal utensils (e.g. forks,
knives, metal spatula) as this may damage the non stick coating of the heating plates.
•
Keep the unit open and allow it to cool down.
•
If you wish to make more sandwiches, plug in appliance once more.
Close the appliance and wait until the toasting surface have reheated sufficiently.
•
When the green light indicator lamp lights up, you can now repeat the toasting process as described above.
•
After completion of the toasting sandwiches process, disconecct the power plug immediatelly. With the
appliance open, allow it to cool down before cleaning.
•
: The heating surface as well as the sides and top of the appliance may get very hot. Avoid any
contact. The sandwich maker must always be positioned horizontally during use.
•
Make it a habit of unplugging the power cord from the power source if you plan to leave the product
unattended.
•
First, disconnect the power plug.
•
Start cleaning only when the appliance has completely cooled down.
•
Clean the housing surface and the toasting surfaces with a soft, dump cloth.
•
Remove toast or food crumbs with a soft brush.
•
Never use abrasive cleaning agents or sharp objects (e.g. scrubbing brush or knife) for cleaning.
•
CAUTION: Do not immerse the appliance in a water or other liquids to avoid electric shock.
•
Do not operate the Sandwich maker when:
a) cord or plug is damaged
b) in the case of the product malfunctions
c) if the product appears damaged in any manner
Bring the product to the place of prchase or to any athorized service centre for inspection, repair or
replacement.
•
CAUTION: To reduce the risk of electric shock, do not disassemble the product by yourself. No user
serviceable parts inside. Refer all service to an authorized Quadro service facility only.
TR-K104
AC 230V~ 50Hz
750W
According to the EU Directive No 2002/96/EC concerning the products labeled with a symbol of a crossed trash
can, the manufacturer warns that this product cannot be considered a standard domestic waste. By proper
treatment, management and recycling of such waste the owner of the product prevents users from the potential
negative consequences to health, which may be caused by inadequate management or disposal of such waste.
For more information concerning recycling and management of the product, please contact your
local government office for dangerous waste management, or the vendor from which you purchased
the product. Waste electrical products must not be dispose with household waste. This equipment
should be taken to your local recycling centre for safe treatment.
Wait
Green
CAUTION
Clean and Care
Service
Technical Data
Model:
Power Supply:
Power:
:
Environmentally-friendly treatment
ENGLISH
Summary of Contents for TR-K104
Page 16: ...www quadro electronics com ...
