Quadro SSC-5031-15, Operating And Installation Instructions

Page: 64 / 72

2
1
Digital Timer
Time of Day Adjustment:
-
+
MODE
A
Figure 18
-
+
MODE
A
du r
Figure 20
Before starting to use your oven, you need to adjust your timer. When the
electric power is connected to your oven, the symbol “A” and three “0” s will
begin to flash on the screen. In this state, your oven will not operate. Press
the Press the (
+ ) and (-) keys simultaneously. The symbol symbol will
appear on the screen. Also, the dot in the middle of the screen will begin to
flash. Using the (+) and (-) keys, adjust the day's time while this dot is
flashing. After the adjustment, wait for a short time and the dot will be lit
continously. You need to repeat this procedure every time you plug your
appliance to the electric network or when the power is restored after a
blackout.
Press the MODE key in the middle. Thesymbol will flash on the screen.
Also, three "0" s will appear. Adjust the desired time period for the warning
by using (+) and (-) keys while the symbol is flashing. Some time after the
completion of the adjustment, the symbol will begin to light continuously.
When the symbol begins to light continuously, the audible warning time
adjustment is done.
 The audible warning time can be set to a time between the time range of 0 and 23.59
When the time is up, the timer gives an audible warning and the symbol begins to flash on the screen.
Pressing any key will stop the audible warning and the symbol disappears on the screen.
Audible Warning Time Adjustment is for warning purposes only. The oven will still
continue to operate after the adjusted time is up.
Semi Automatic Programming According to Cooking Duration :
This function is used to cook in the desired time duration.
The foods to be cooked are put into the oven. The oven is adjusted to the
desired cooking function. The oven thermostat is adjusted to the desired
degree depending on the dish to be cooked.
Keep pressing on the MODE button until you see "dur" (stands for
duration) on the timer screen. When you see "dur" on the timer screen, the
symbol (A) will begin to flash. Adjust the cooking duration for the food you
wish to cook, by using the (
+ ) and (-) keys while the timer is in this position.
Some time after the adjustment operation is completed, the day's time will
appear on the screen and the symbols (A) and will begin to continuously
light on the screen. While doing this, the oven will also start to operate.
 A cooking period between the time range of 0 and 10 hours can be set.
At the completion of the set duration, the timer will stop the oven and give an audible warning. Also,
the symbol (A) will begin to flash on the screen. After bringing the oven button and oven hermostat button
to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will be brought to
manual use function.