Quadro SSC-5031-15, Operating And Installation Instructions

Page: 54 / 72

GENERAL WARNINGS AND MEASURES
Your appliance is produced in accordance with the local and international standards and
regulations applicable. The maintenance and repair works must be made only by authorized service
technicians. The installation and repair works without following proper knowledge may endanger you.
While your appliance operates, its outside surfaces heat up. The interior surfaces of oven, and
the flue outlets are quite hot. Even if the appliance is turned off, these parts keep its heat for a specific time.
Do not touch onto hot surfaces, and keep children away. Do not leave the cooker while cooking with solid or
liquid oils. They may catch fire on condition of extreme heating. Never pour water to the flames that are
caused by oil. Cover the saucepan or frypan with its cover in order to choke the flame that has occured in
this case and turn the cooker off. The oven and heat adjustment switches must be adjusted for cooking in
your oven. Otherwise the oven does not operate. When the door or drawer of oven is open do not leave
anything on it . You may unbalance your appliance or break the cover. Do not put heavy things or
flammable or ignitable goods (nylon, plastic bag,paper,cloth...etc) into the lover drawer. This includes
cookware with plastic accessories (e.g. handles). Plug the appliance off the electrical network when you do
not use the appliance and keep the gas valve off. Protect your appliance against atmospheric effects. Do
not leave it to effects such as sun, rain, snow, powder etc. Remember that this appliance is designed for
indoor use.
GAS CONVERSIONS
Caution : The following procedures must be undertaken by authorized service personnel.
Your appliance is adjusted to be operated with LPG gas. The gas burners can be adapted to
different types of gas, by replacing the corresponding injectors and adjusting minimum flame length
suitable to the gas in use. For this purpose, following steps should be performed:
Changing Injectors:
Hob Burners:
Cut off the feeding gas flow and electric current. Remove the hob cap and the adapter. Unscrew
the injectors. For this, use a 7mm spanner. Replace the injector with the ones from the spare set, with
corresponding diameters suitable to the type of gas that is going to be used, according to the information
chart (which is also supplied in the spare set).
Oven/Grill Injectors:
The oven and grill injectors are assembled by a single screw that is placed on the tip of the
burner. For grill burners, this screw is already visible. Remove the screw, pull the grill burner to yourself and
you will see the injector revealed on the rear surface of the oven cavity.
For oven burners, open the drawer compartment and you will see the assembly screw below the
burner. Remove the screw, move the burner diagonally and the injector will be revealed on the rear side of
the burner box.
Remove the injectors with a 7mm spanner and replace the injector with the ones from the spare
set, with corresponding diameters suitable to the type of gas that is going to be used, according to the
information chart (which is also supplied in the spare set).
11