Quadro SSC-5031-15, Operating And Installation Instructions, Page: 58 / 72

1
5
WARNING
When the operating for the first time or whenever the hotplate has not been used for prolonged of
time it is necessary to eliminate any humidity which may have accumulated around the electrical elements
of the plate by operating the hotplate on its lowest setting for about 20 minutes.
Use only flat pans and with a sufficiently thick base.
Never use pans with a smaller diameter than of the hotplate.
Ensure that the base of the pan is dry before placing it on the hotplate. While the hotplate is in operation it
is important to ensure that the pan is centered correctly above the hotplate.
Never operate the hob without pans on the hotplates.
The temperature of accessible parts maybe high when the appliance is operating. So it is imperative to
keep children and animals out of the reach of the hotplate during and after the operation.
If you note a crack on the hotplate it must be immediately switched off and replaced.
To ensure long life, the hotplate must be thoroughly cleaned with appropriate cleaning products. To avoid
rustiness and to keep them new it is recommended to rub the hotplates lightly with tissue with a small
amount of oil. Do not use a steam cleaner.
After use, the hotplates remain very hot for a prolonged of time, do not touch them and to not place any
object on top of the hotplate.
CORRECT
WRONG
pot bottom is round
WRONG
pot buttom is small
WRONG
pot buttom does not sit well