Quadro6L/4L Manual I: Installation Guide
Step 2-B: Using Key System Emulation
Fig. l- 35: Key System Emulation – SLA page
The SLA Name text field is used to insert the preferred name for the corresponding SLA
line. On the IP phones with the display available, this name is visible on the display next to
the programmable key.
A group of manipulation radio buttons allow you to configure the SLA line:
•
Inactive - disables the corresponding SLA line.
•
PSTN - allows you to assign the SLA line to the available PSTN lines on the Qu-
adro. This selection disappears when there are no more unassigned PSTN lines
available.
Attention:
By assigning a PSTN line to the SLA line, it becomes unavailable for
calls through Auto Attendant or Call Routing Table.
•
SIP - used to assign the SLA line to the certain SIP account. This selection has
two sub-selections:
o
Custom Settings - used to define a SIP server and SIP registration pa-
rameters. The following parameters are required for this selection:
Username - the registration username on the SIP server.
Password - the registration password on the SIP server.
SIP Server - the IP address or the host name of the SIP server.
SIP Port - the port of the SIP server.
Authentication User Name - an identification parameter to reach the SIP
server. It should be provided by the SIP service provider and can be re-
quested for some SIP servers only. For others, the field should be left emp-
ty.
Outbound Proxy Host Address and Port - the IP address or the host
name and the port number of the outbound proxy SIP server.
Quadro6L/4L; (SW Version 5.2.x)
39
Summary of Contents for Quadro6L
Page 1: ......
