Quadro6L/4L Manual I: Installation Guide
Step 2-B: Using Key System Emulation
This means that each FXO line on the Quadro6L/4L is assigned to the SLA line and all in-
coming calls on that FXO line will be ringing on the corresponding SLA line. Along with this,
the programmable key on the IP phone responsible for that SLA line will be blinking during
the incoming call. Any user who has the programmable key blinking on his IP phone will be
able to pick up the incoming call.
To configure the IP phones to use the Key System Emulation service of the Quadro, the
programmable keys should be adjusted correspondingly. To do so, go to the Telephony
menu, Line Settings, move to the IP Line Settings page. If the IP Line is already config-
ured, push the Advanced link for the corresponding IP line in the Details column, other-
wise configure the IP line first as indicated in the chapter
Step 2-A: Using IP Lines
.
The Advanced link leads you to the Programmable Keys Configuration page where pro-
grammable keys for the corresponding IP phone can be configured. Assign the SLA line to
the preferred Programmable Key and save the settings. Once the corresponding IP phone
is restarted, the selected programmable key will be responsible for the calls on the config-
ured SLA line. The corresponding programmable key will be blinking during incoming calls
on that SLA line. To make an outgoing call, the caller will simply need to push that pro-
grammable key to get access to the FXO line (in default configuration, as indicated above).
The Advanced Configuration link moves to the Advanced Configuration page that is
used to enable/disable the blind transfer service from SLA lines to extensions or their voice
mailboxes.
Please Note:
By assigning the FXO line to the SLA line, it becomes unavailable for calls
through Auto Attendant or Call Routing Table. If you wish to leave FXO line(s) available for
calls through the Auto Attendant or Call Routing Table, go to the Key System Emulation
page from the Telephony menu, push the SLA line to which the corresponding FXO
(PSTN) line is assigned, choose the Inactive option or change the SLA assignment to a
SIP server. Now the corresponding PSTN line is not used in the Key System Emulation and
is available for regular PSTN calls.
Using SLA Lines for SIP Calls
You may want to use the SLA lines of the Key System Emulation for SIP calls through cer-
tain SIP servers instead of assigning them to the PSTN lines. To do so, go to the Key Sys-
tem Emulation page from the Telephony menu of the Quadro’s Web Management. Push
the corresponding SLA line number to get its configuration page.
Quadro6L/4L; (SW Version 5.2.x)
38
Summary of Contents for Quadro6L
Page 1: ......