Step 7B
Locate the rear window and line up and slide the rear window into the “C” Channel located at the top of the rear
portion of the top deck (FIGs 44, 45 & 46).
Once both quarter windows are secured to the top deck, line up the driver’s side rear zipper on the quarter window and
on the rear window and zip it down a few inches (FIG 47). Repeat this on the passenger side of the rear window.
You may have to lift the quarter window up to secure this second zipper. Once both side zippers are secure, zip the rear
window zippers down about half way (Fig 48). You will close these zippers completely at the end of step 10.
Installing the Rear Window to the Top Deck
FIG 44
FIG 45
FIG 46
FIG 47
FIG 48
After installing the side tubes to the door surround brackets please check the location of the front header to make
sure it its snug and does not “over-hang” the front of the windshield. Please see page 8, Step 11 for a visual repre-
sentation of the correct header location.
NOTICE
FIG 48A
There may be times when the
rear window
“P” extrusion may come out of the “C” Channel ends due to
extreme downward
pressure. This is normal. If this occurs, slide the “P” extrusion out of the C channel and re-
install securing the
window back into the “C” Channel.
NOTICE
Each Time you remove the
rear
window:
Completely pull the window out of the “C” Channel
or out of the "Zipper Box"
before pulling the window
down!
Do not “Peel” the window out
(Fig 48A).
