Important Safety information
Your QuadraTop® Fabric Replacement Top
is intended to be used with other QuadraTop
Products to increase the fair weather enjoy-
ment of your off-road capable vehicle. Before
installation, please take a moment to review
the following safety information
and installation instructions. Important safety
information is generally preceded by one of
three signal words indicating the relative risk
of injury.
The signal words mean.
a hazardous situation which, if not avoided, could result in death or serious in-
jury. You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.
WARNING
CAUTION
NOTICE
a hazardous situation which, if not avoided, could result in minor or moderate
injury. You CAN be moderately HURT and also may suffer property damage if
you don’t follow instructions.
Careful attention is required to this instruction or operation but does genera-
lly not relate to personal injury. Damage to your Quadratec® product or other
property may result if you don’t follow instructions.
Before you begin Installation:
We are excited that you have chosen the
Adventure Top
Fabric Replacement Top Kit.
This high-quality soft top is designed to
provide protection from the elements and a
stylish look on your Jeep®. Please note that it
is important that you become familiar with the
installation process of this top by reading the
following instruction sheet and warnings
thoroughly.
When unpacking, carefully check to make sure
all parts are included. If any part is missing
or broken, please call Quadratec customer ser-
vice at 800-745-6037. When unpacking, check
to make sure all parts are included.
For a smooth fit and ease of installation, this top should be installed at tempe-
ratures above 72 degrees. Below this temperature, the fabric may contract an
inch or more making it difficult to install. We highly recommend taking the top
out of the package and letting it sit inside a warm place or direct sunlight for
1-2 hours before you install the top. When warm, this top will install quickly.
Preparation for Installation of
the Adventure Top
Fabric Only Replacement Top:
Factory Hardware Requirement:
This product is designed to fit over your original
factory soft top hardware with the rear bow
assembly removed.
Please see HARDWARE A
to make sure you have the correct hardware for
this top and iden-tify which components will be
removed.
Please note that the bow mount brackets insta-
lled on the roll bar and factory door surrounds
will REMAIN on the vehicle and will be used to
install the
Adventure Top
hardware.
You will
also be re-using your Factory Windshield
Header for this install.
NOTICE
The Trusted Source
2