After sliding the retainer all the way through the
“C” Channel, roll the tailgate bar into the mounts
with the outside of the fabric facing towards the
rear of the Vehi- cle (Figs 76 & 77).
Once the Tailgate bar in secure, lower zippers on
both sides of the rear curtain (FIG 78) and then
secure the rear zipper cover flap as shown in Figs
79 & 80.
Step 11B: Installing the Tailgate Bar and Rear
Window to the body of the Jeep®
Once the Tailgate bar in secure, lower zippers on
both sides of the rear curtain (FIG 78) and then
secure the rear zipper cover flap as shown in Figs
79 & 80.
Using your SkyMaster Fastback Soft Top
Folding Back the Front Section of your Top:
To fold back your SkyMaster Soft Top: If driving,
stop the vehicle and put in park. Unlatch the front
header from the windshield (FIG46, on page 6)
Pushing up from the middle, fold back the top.
Make sure the hook and loop fastener are tightly secured to the center bow
after the front sun roof is folded back. Both rear corner straps must also be se-
cure when the top is folded back These safety measures are designed to secure
the top deck to the vehicle and if not adhered to can cause injury, death and a
serious accident. Always wear your seat belts when using this product!
WARNING
Top Installation is now complete!
Before Rolling up the rear window, make sure the glass is clean. Dirt and Debris
can cause window scratches when rolled up.
NOTICE
The Trusted Source
11
