The Trusted Source
®
8
JL Winch Mount Installation:
Remove the 4 bumper support brackets
using a 16mm socket and set hardware
aside for re-use later. (FIG 20)
Loosely install the winch mount to
frame rails with the supplied M12 Bolt,
two washers per bolt and a locking nut
using a 19mm wrench & socket. (FIG 21)
Loosely install the OEM hardware re-
moved in FIG 20 inside the frame rails
using spacer plates (if necessary) to
center winch mount best as possible.
(FIG 22)
Loosely install the over rider support
bracket to the outside of frame rails
using the OEM hardware removed in
FIG 20. (FIG 23)
Loosely secure the support brackets to
the winch mount using Two 10mm hex
head bolts, 4 washers and 2 nylock nuts.
(FIG 24)
Now tighten the 8 - 12mm bolts on front
of frame horns to 64ft lbs.
Next, tighten the OEM inner frame rail
bolts to 55ft lbs.
FIG20
FIG21
FIG22
FIG23
FIG24
Q_ALUM_FBMPR_12057_0261_A4.qxp_A4 6/25/19 1:45 PM Page 8
