The Trusted Source
®
9
Fog Light Installation:
Aluminum Front Bumper: Install on Vehicle
Attach the fog lamps to the brackets as
shown with the supplied M4 hardware
using a 3mm hex key and 7mm wrench.
(FIGs 25A & B)
Secure the fog lamp brackets to the
winch plate with the supplied M6 bolts
and washers using a 10mm socket.
(FIG 26)
FIG25
FIG26
Loosely secure the bumper to winch
plate with (2) M10 allen head bolts
using a 6mm hex key through the
fairlead mounting holes. (FIG 27)
Install the tow hooks through the
bumper and into the winch plate with
the supplied M10 allen head bolts and
washers using a 6mm hex key. (FIG 28)
You may now torque the over rider bar
bracket to winch plate M10 hardware
to 55ft lbs.
Now is a good time to install your winch
and fairlead into the bumper according
to your winch installation instructions.
FIG27
FIG28
With the help of a friend lift the bumper into place on the frame of the Jeep.
WELDED FRONT BUMPERS ARE HEAVY AND WE STRONGLY SUGGEST
THE ASSISTANCE OF AN ABLE-BODIED ASSISTANT DURING LIFTING
AND INSTALLATION OF YOUR BUMPER.
Q_ALUM_FBMPR_12057_0261_A4.qxp_A4 6/25/19 1:45 PM Page 9
