August 3, 2018
7050-145L
3
SANTA FE FREESTANDING
Model
Santa Fe Pellet Appliance
Laboratory
OMNI Test Laboratories, Inc.
Report No.
061-S-77d-6.2
Type
Solid Fuel Room Appliance/Pellet Fuel
Burning Type
Standard
ASTM E1509-04, ULC S627-00 and
ULC/ORD-C1482-M1990 Room
Appliance Pellet Fuel Burning type and
(UM) 84-HUD, Mobile Home Approved.
FCC
Complies with Part 15 of FCC Rules.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
The Quadra-Fire Santa Fe Pellet Appliance meets the U.S. Environmental Protection Agency’s emission limits for pellet
appliances sold after May 15, 2015.
This pellet appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate
this pellet appliance in a manner inconsistent with operating instructions in this manual.
EPA Certification #:
940-14
EPA Certified Emissions:
1.8 grams per hour
*LHV Tested Efficiency:
N/A
**HHV Tested Efficiency:
N/A
***EPA BTU Output:
8,500 to 28,200 / hr.
****BTU Input:
11,600 to 38,700 / hr.
Vent Size:
3 or 4 inches, “L” or “PL”
Hopper Capacity:
52 lbs.
Fuel
Wood Pellets
* Weighted average LHV efficiency using data collected
during EPA emissions test.
**
Weighted average HHV efficiency using data collected
during EPA emissions test.
***
A range of BTU outputs based on EPA Default
Efficiency and the burn rates from the low and high EPA
tests.
****
Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU’s which is the average BTU’s
from a pound of pellets.
1
Important Safety Information
NOTICE:
This installation must conform with local codes. In the absence of local codes you must comply with the
ASTM
E1509-04, ULC S627-00, (UM) 84-HUD and ULC/ORD-C-1482.
A. Appliance Certification
B. BTU & Efficiency Specifications
