Page 4
7019-205C
September 1, 2008
R
Santa Fe Pellet Insert
1
Listing and Code Approvals
A. Appliance Certification
C. Glass Specifications
E. BTU & Efficiency Specifications
This appliance is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass.
This appliance is approved for mobile home installations
when not installed in a sleeping room and when an outside
combustion air inlet is provided.
The structural integrity of the mobile home floor, ceiling, and
walls must be maintained. The appliance must be properly
grounded to the frame of the mobile home and use only listed
pellet vent, Class “L” or “PL” connector pipe.
A Quadra-Fire Outside Air Kit must be installed in a mobile
home installation.
B. Mobile Home Approved
NOTE:
This installation must conform with local codes. In
the absence of local codes you must comply with the
ASTM
E1509-2004, ULC S628-93, ULC/ORD-C-1482-M1990,
(UM) 84-HUD
D. Electrical Rating
115 VAC, 60 Hz, Start 4.1 Amps, Run 1.1 Amps
*BTU output will vary, depending on the brand of fuel you
use in your appliance. Consult your Quadra-Fire dealer
for best results.
NOTE:
Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
MODEL:
Santa Fe Pellet Insert
LABORATORY:
OMNI Test Laboratories, Inc
REPORT NO.
061-S-62-6
TYPE:
Solid Fuel Room Heater/Pellet Fuel
Burning Type Insert
STANDARD:
ASTM E1509-2004, ULC S628-93 and
ULC/ORD-C1482-M1990 Room Heater
Pellet Fuel Burning Type and (UM) 84-
HUD, Mobile Home Approved
Particulate
Emissions Rating:
.7 grams/hr
*BTU Output:
8,000 - 30,000 / hr
Heating Capacity:
up to 1,500 sq. ft. depending
on climate zone
Hopper Capacity:
45 lbs
Fuel:
Wood Pellets or Shelled Corn
Shipping Weight:
214 lbs
