background image

17 August, 2018

 1

7075-177A

VOYAGEUR GRAND AUSTRALIAN 

WOOD INSERT

AUTOMATIC COMBUSTION CONTROL 

(ACC)

MODEL:

GRAND-MBK-AU

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation. 

OWNER: Retain this manual for future reference. 

NOTICE: DO NOT DISCARD THIS MANUAL

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

WARNING

Hot glass and appliance will cause burns.

•  Do not touch glass until it is cooled

•  Use leather gloves when reloading fuel

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room as 

appliance.

•  Alert children and adults to hazards of high 

temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other 

flammable materials away.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may over fire and generate poisonous 

gases (i.e. carbon monoxide).

• 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any other 

appliance.

• 

Do not over fire - If appliance or chimney connector 

glows, you are over firing. Over firing will void your 

warranty.

• 

Comply with all minimum clearances to combustibles 

as specified. Failure to comply may cause house fire.

WARNING

 If the information in these instructions 

is not followed exactly, a fire could result 

causing property damage, personal injury, 

or death.

 

Summary of Contents for GRAND-MBK-AU





























Reviews: