March 26, 2020
7039-804B
25
F. Decorative Side Panel
Left Side Panel Service Part: SRV7037-026
Right Side Panel Service Part: SRV7037-027
Tile Frame Service Part: SRV7033-324
Frame Blank Service Part: SRV7033-346
Your appliance ships with two different side options, one
is a solid side panel
(Figure 25.1)
and tile side panel
(Figure 25.2)
. There are two of each and no left or right
side, these can be changed at anytime.
NOTE:
300°F high temp paint can be use to repaint the
solid side panel only! DO NOT use on the rest of
appliance this requires 1200°F high temperature
paint.
Solid Side Panel Removal
1. Remove solid panel from side by lifting up and pulling
away from appliance (use a flat tool to pry from bottom
if needed)
(Figure 25.4).
WARNING
Fire Risk.
Use only noncombustible materials as a
decorative tile.
Figure 25.1
Figure 25.3
2
Figure 25.2
Figure 25.6
1
Figure 25.4
Figure 25.5
3
Securing
Clip
The appliances are being shipped with a solid side panel
securing clip on both sides. Please remove and discard
pins prior to use
(Figures 25.3)
.
Tile Panel Installation
2. Remove tile frame from side by lifting up and pulling
away from appliance
(Figure 25.4 reference solid
side panel removal).
3. Stack non-combustible material tiles in tile frame as
shown in
Figure 25.2
by sliding first tile in, bend tabs
on back side
Figure 25.5
, then slide last tile in position
so that it rests on tabs.
Tile Dimensional Requirements:
Max Thickness: 5/16”
Max Length/Width: 11-7/8” square
Min Length/Width: 11-11/16” square
4. Reattach tile frame
(Figure 25.6)
.
