4
5
5
5
5
5
5
5
5
3
5
5
5
5
5
2
2
2
2
2
4
5
5
5
3
1
1
5
5
5
5
5
5
5
5
5
5
1
1
4
2
2
2
2
2
4
5
5
5
3
5
5
5
3
Left Side
Right Side
Back
Floor
1-1/4"
3-1/4"
9.0"
1
3 Firebrick Replacement
The firebox of your fireplace is lined with high quality
firebrick, which has exceptional insulating properties.
There is no need to use a grate; simply build a fire on
the firebox floor. Do not operate the fireplace without
bricks.
IMPORTANT: The bricks are very similar in size. Be
certain you have the proper brick in the correct location.
Measure the brick size for accuracy.
After the coals are completely cooled, remove all old
firebrick and ash from unit and vacuum out firebox.
• Remove new brick set from box and lay out to
diagram shown in Figure 4.3.
• Lay bottom bricks in unit.
• Install rear bricks on the top of the bottom bricks.
Slide top of bricks under clip on back of firebox wall
and push bottom of brick back.
• Install side bricks. Slide top of brick under clips on
side of firebox and push the bottom of the brick until
it is flush with the side of the unit.
Figure 4.4 Fire Brick Installed
Figure 4.3 Fire Brick Configurations
# Brick Size
Qty. In Set
1 9” x 3-1/4” x 1-1/4” Angled (see drawing)
2
2 6-1/4” x 4-1/2” x 1-1/4”
5
3 9” x 2” x 1-1/4”
2
4 6-1/4” x 3-1/2” x 1-1/4”
2
5 9” x 4.5” x 1-1/4”
16
20
Quadra-Fire • 7100 FP Owner’s Manual • 433-3600 • Rev J • 09/21/15
