Quadra-Fire 7100FP-BK-B Owner'S Manual Download Page 72 | Manualshive

Page: 72 / 72

background image

R

Hearth & Home Technologies

1445 North Highway

Colville, WA 99114

Division of HNI INDUSTRIES

433-1390G

September 1, 2008

Page 72

CONTACT INFORMATION

:

Please contact your Quadra-Fire dealer with any questions or concerns.

For the number of your nearest Quadra-Fire dealer,

visit our web site at www.quadraﬁre.com

DEALERSHIP WHERE PURCHASED:

_______________________________________

_______________________________________

_______________________________________

DEALER TELEPHONE: __________________

Your Records for Model:

SERIAL NUMBER: __________________

DATE PURCHASED: __________________

DATE INSTALLED: __________________

7100FP EPA Certiﬁed

Woodburning Fireplace

This product may be covered by one or more of the following patents: (United States) 4593510, 4686807, 4766876, 4793322, 4811534,
5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 5452708, 5542407,
5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099,
6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579,
6672860, 6688302B2, 6715724B2, 6729551, 6736133, 6748940, 6748942, 6769426, 6774802, 6796302, 6840261, 6848441, 6863064,
6866205, 6869278, 6875012, 6880275, 6908039, 6919884, D320652, D445174, D462436; (Canada) 1297749, 2195264, 2225408,
2313972; (Australia) 780250, 780403, 1418504 or other U.S. and foreign patents pending.

Do NOT discard this manual.

CAUTION

• Important operating and maintenance

instructions included.

• Read, understand and follow these instruc-

tions for safe installation and operation.

• Leave this manual with party responsible

for use and operation.

H. Contact Information

«
...
70
71
72

Summary of Contents for 7100FP-BK-B









































































Reviews:

No comments

Related manuals for 7100FP-BK-B

Brand: barbas Pages: 32

Brand: barbas Pages: 48

ST. CROIX HD WT17YL

Brand: Backyard Creations Pages: 13

Brand: Valcourt Pages: 44

Brand: Napoleon Pages: 36

Brand: Empire Comfort Systems Pages: 66

Brand: Vanguard Pages: 38

F-0710X1 series

Brand: Hearth Products Pages: 23

Brand: Martin Pages: 36

Brand: Paramount Fitness Pages: 56

Brand: Coopers of Stortford Pages: 2

Brand: NovaFlex Pages: 24

Brand: Contempo Pages: 10

DRT4000-C Series

Brand: Superior Fireplaces Pages: 80

Greentouch 1801-FG

Brand: JSJ Pages: 20

AURA Fire Table

Brand: Seaside Casual Pages: 2

astria Mission Mission36TMN

Brand: IHP Pages: 32

Brand: Travis Industries Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands